Sitework
Installing a 6 metre long, 2.4 metre high Betabric wall panel is extremely simple.

Dig a trench 750 mm deep and 500 mm wide. Place and level concrete positioning trays at 6 metre intervals. Lower the Betabric panel into the trays, positioning it between the rebars, and prop as necessary. Fill trench with concrete.

For finishing purposes, the joints between the Betabric panels are filled with a proprietary sealant.

1. Betabric Pre-laid Boundary Wall being lifted into position
2. Pouring concrete into trench
3. Completed wall showing concrete footing